System.Device.Gpio 1.1.0-prerelease.20555.1

The System.Device.Gpio package supports general-purpose I/O (GPIO) pins, PWM, I2C, SPI and related interfaces for interacting with low level hardware pins to control hardware sensors, displays and input devices on single-board-computers; Raspberry Pi, BeagleBoard, HummingBoard, ODROID, and other single-board-computers that are supported by Linux and Windows 10 IoT Core OS can be used with .NET Core and System.Device.Gpio.  On Windows 10 IoT Core OS, the library wraps the Windows.Devices.Gpio.dll assembly.  On Linux, the library supports three driver modes: libgpiod for fast full-featured GPIO access on all Linux distros since version 4.8 of the Linux kernel; slower and limited-functionality GPIO access via the deprecated Sysfs interface (/sys/class/gpio) when running on older Linux distro versions with a Linux kernel older than version 4.8; and lastly board-specific Linux drivers that access GPIO addresses in /dev/mem for fasted performance at the trade-off of being able to run on very specific versions of single-board-computers.  In the future, the board-specific Linux drivers may be removed in favor of only supporting libgpiod and sysfs Linux interfaces.  In addition to System.Device.Gpio, the optional IoT.Device.Bindings NuGet package contains device bindings for many sensors, displays, and input devices that can be used with System.Device.Gpio.

This is a prerelease version of System.Device.Gpio.
There is a newer version of this package available.
See the version list below for details.
Install-Package System.Device.Gpio -Version 1.1.0-prerelease.20555.1
dotnet add package System.Device.Gpio --version 1.1.0-prerelease.20555.1
<PackageReference Include="System.Device.Gpio" Version="1.1.0-prerelease.20555.1" />
For projects that support PackageReference, copy this XML node into the project file to reference the package.
paket add System.Device.Gpio --version 1.1.0-prerelease.20555.1
The NuGet Team does not provide support for this client. Please contact its maintainers for support.

NuGet packages (18)

Showing the top 5 NuGet packages that depend on System.Device.Gpio:

Package Downloads
This package provides a set of Device Bindings that use System.Device.Gpio package to communicate with a microcontroller.
piTop module.
.Net Standard 2.0 One Wire library for Windows IoT on Raspberry Pi via DS2482-100 and DS2482-800 I2C to One Wire bridge
pi-top[4] device.
Driver for the Bme680 environmental sensor. Provides a full range API for the entire sensor functionality.

GitHub repositories (2)

Showing the top 2 popular GitHub repositories that depend on System.Device.Gpio:

Repository Stars
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.
Interact with I2C, SPI & GPIO devices using PowerShell Core!

Version History

Version Downloads Last updated
1.3.0 2,155 12/22/2020
1.2.0 3,693 11/24/2020
1.1.0 2,581 11/9/2020
1.1.0-prerelease.20555.1 261 11/5/2020
1.1.0-prerelease.20276.1 5,166 7/22/2020
1.1.0-prerelease.20153.1 2,776 3/3/2020
1.0.0 63,627 9/23/2019
1.0.0-prerelease.19413.1 1,107 8/13/2019
0.1.0-prerelease.19376.1 954 7/26/2019
0.1.0-prerelease.19310.5 1,664 6/11/2019
0.1.0-prerelease.19171.3 1,919 3/21/2019
0.1.0-prerelease.19078.2 3,680 1/28/2019