Pi5MatrixSharp 0.2.0

Pi5MatrixSharp

Pi5MatrixSharp is a C# wrapper for driving HUB75 RGB LED matrix panels on the Raspberry Pi 5 using Adafruit's Piomatter backend.

It is aimed at the "keep my app in C#" case: render however you like in managed code, then push the final frame to the panel through a small native shim.

Status

• Raspberry Pi 5 only
• Linux ARM64 only
• Native backend bundled as libpi5matrix.so
• Tested against Adafruit's Adafruit_Blinka_Raspberry_Pi5_Piomatter at commit 9ce4965a3fddf5b44c9da6c8dc3738cfe0403028

Install

dotnet add package Pi5MatrixSharp

Package page: https://www.nuget.org/packages/Pi5MatrixSharp/

Quick Start

using Pi5MatrixSharp;

// Factory method for the most common single-panel setup
using var matrix = Pi5MatrixFactory.CreateSingle64x32();

matrix.SetPixel(0, 0, 255, 0, 0);
matrix.SetPixel(1, 0, 0, 255, 0);
matrix.SetPixel(2, 0, 0, 0, 255);
matrix.Show();

Or configure everything manually:

using var matrix = new Pi5Matrix(new Pi5MatrixOptions
{
    Pinout = Pi5MatrixPinout.AdafruitMatrixBonnet,
    Geometry = new Pi5MatrixGeometryOptions
    {
        Width = 64,
        Height = 32,
        AddressLineCount = 4
    }
});

For a runnable example, see samples/Pi5MatrixSharp.Sample.

Features

Brightness Control

Adjust the master brightness at runtime. Applied during Show() with no native overhead.

matrix.Brightness = 0.5f;  // 50% brightness

Gamma Correction

LED panels have non-linear brightness response. Enable gamma correction for accurate colours:

matrix.GammaCorrection = true;     // default gamma 2.5
matrix.GammaExponent = 2.2f;       // or choose your own

Double Buffering

Write pixels to the back buffer, then call Show() to push them to hardware. The front buffer (pinned in memory for native access) is updated atomically with brightness and gamma applied. No tearing.

matrix.SetPixel(10, 5, 255, 128, 0);
matrix.Show();  // back buffer -> front buffer -> hardware

CopyRgba32

Drop-in for SixLabors.ImageSharp Rgba32 pixel data. Alpha is discarded automatically.

var rgba = new byte[64 * 32 * 4];
image.CopyPixelDataTo(rgba);
matrix.CopyRgba32(rgba);
matrix.Show();

Thread Safety

Show() is internally synchronised. Safe to call from a render thread while another thread modifies the back buffer.

Chained Panels

Factory methods for common multi-panel configurations:

// Two panels side-by-side (128x32)
using var wide = Pi5MatrixFactory.CreateChained128x32();

// Two panels stacked (64x64)
using var tall = Pi5MatrixFactory.CreateStacked64x64();

// Four panels in a 2x2 grid (128x64)
using var grid = Pi5MatrixFactory.CreateGrid128x64();

// Arbitrary arrangement
using var custom = Pi5MatrixFactory.CreateCustom(192, 96, addressLineCount: 5);

Diagnostics

Console.WriteLine(matrix);
// Pi5Matrix 64x32 Rgb888Packed @ 120fps

var diag = matrix.GetDiagnostics();
Console.WriteLine($"Show count: {diag.ShowCount}, last show: {diag.LastShowDurationMs:F2}ms");

Requirements

• Raspberry Pi 5
• 64-bit Raspberry Pi OS with /dev/pio0
• User in the gpio group
• A supported pinout:
  • AdafruitMatrixBonnet
  • AdafruitMatrixBonnetBgr
  • Active3
  • Active3Bgr

Building The Native Library

The repo includes a rebuild script that fetches the pinned Adafruit Piomatter source and rebuilds the native shim directly on Linux:

./scripts/rebuild-libpi5matrix.sh

That script updates:

runtimes/linux-arm64/native/libpi5matrix.so

It is best run on the Raspberry Pi 5 you intend to test with.

Packaging

To build the NuGet package locally:

./scripts/pack.sh

The resulting package is written to:

artifacts/nuget

Releasing

The intended release flow is:

1. Build and test with ./scripts/pack.sh
2. Create a Git tag such as v0.1.0
3. Publish a GitHub release and attach the generated .nupkg
4. Push the same package to NuGet using the NUGET_API_KEY repo secret

License

This project is distributed under GPL-2.0-only. See LICENSE.

The bundled native backend is built on top of Adafruit's GPL-2.0-only Pi 5 Piomatter implementation. See THIRD_PARTY_NOTICES.md.