GeometryHelper.TeklaConvert.2025 9.0.2

GeometryHelper.TeklaConvert

Converts geometry between Tekla Structures and GeometryHelper, both ways: points, vectors, line segments, geometric planes, coordinate systems, bounding boxes, transformation matrices, and the faces and loops of a Tekla solid. It also reads the objects of IFC reference models into solids placed where Tekla shows them (see IFC reference models).

Installation

Install the package whose year matches the Tekla Structures you build for:

dotnet add package GeometryHelper.TeklaConvert.2020   # Tekla Structures 2020
dotnet add package GeometryHelper.TeklaConvert.2025   # Tekla Structures 2025
dotnet add package GeometryHelper.TeklaConvert.2026   # Tekla Structures 2026

All three carry the same code, namespaces and GeometryHelper.TeklaConvert.dll; they differ only in the Tekla Open API they are compiled against (see Which Tekla version). They replace the former GeometryHelper.TeklaConvert package, which was built against 2020 only: switching needs no code change.

Each also brings GeometryHelper.IfcConvert (xBIM, about 16 MB), which reads the IFC reference models.

You must add three Tekla assemblies yourself

This package does not contain Tekla.Structures.dll, Tekla.Structures.Drawing.dll or Tekla.Structures.Model.dll. They are Trimble's to distribute rather than ours, so the package ships only its own code and leaves those three references to you. Until you add them, code that touches this library fails to compile with CS0012: the type is defined in an assembly that is not referenced.

Take them from either source:

From your Tekla Structures installation — the usual choice, because it guarantees you build against the same version you run:

<Reference Include="Tekla.Structures">
  <HintPath>C:\Program Files\Tekla Structures\2026.0\bin\Tekla.Structures.dll</HintPath>
  <Private>False</Private>
</Reference>
<Reference Include="Tekla.Structures.Drawing">
  <HintPath>C:\Program Files\Tekla Structures\2026.0\bin\Tekla.Structures.Drawing.dll</HintPath>
  <Private>False</Private>
</Reference>
<Reference Include="Tekla.Structures.Model">
  <HintPath>C:\Program Files\Tekla Structures\2026.0\bin\Tekla.Structures.Model.dll</HintPath>
  <Private>False</Private>
</Reference>

Or from Trimble's own packages on nuget.org (published from 2024 onward):

dotnet add package Tekla.Structures
dotnet add package Tekla.Structures.Drawing
dotnet add package Tekla.Structures.Model

Keep Private/Copy Local false. Tekla loads those assemblies from its own installation at run time, and a copy sitting next to your plugin risks loading a build that does not match the running Tekla.

Which Tekla version

Tekla's Open API assemblies are strong-named per release, so each package is compiled against one Tekla version and its references carry that version:

• A plugin loaded inside TeklaStructures.exe cannot redirect one Tekla version to another (you do not own that process's config), so install the package for the Tekla it runs in.
• A console application or any process you own can also run against a newer Tekla than its package through a binding redirect, which AutoGenerateBindingRedirects writes for you.

The Tekla year is part of the package id rather than the version, so a package update never moves you to a build for another Tekla, and both packages carry the version the rest of GeometryHelper is released under (GeometryHelper.TeklaConvert.2026 4.0.0 depends on GeometryHelper 4.0.0). The assembly and file version of GeometryHelper.TeklaConvert.dll add the year (4.0.0.2026), so the DLL itself tells which Tekla it was built for.

The API surface it uses — Point, Vector, LineSegment, Matrix, GeometricPlane, CoordinateSystem, AABB, Solid, Face, Loop — is unchanged from 2020 through 2026.

Building from source

The project builds for one Tekla version at a time, chosen by the TeklaVersion property (2020 when omitted), against the assemblies committed under Lib2020, Lib2025 or Lib2026:

dotnet build src/GeometryHelper.TeklaConvert/GeometryHelper.TeklaConvert.csproj -p:TeklaVersion=2026
dotnet test  tests/GeometryHelper.TeklaConvert.UnitTest/GeometryHelper.TeklaConvert.UnitTest.csproj -p:TeklaVersion=2026

Each version builds into its own bin/Tekla{year} and obj/Tekla{year} folders. Supporting another Tekla version means adding its Lib{year} folder and its year to TEKLA_VERSIONS in the two GitHub workflows.

Usage

using GeometryHelper;
using GeometryHelper.Geometry;
using GeometryHelper.TeklaConvert;
using TSG = Tekla.Structures.Geometry3d;

// Tekla to GeometryHelper
GeoPoint3 point = new TSG.Point(1000, 2000, 3000).ToGeoPoint3();
GeoLine3 line = segment.ToGeoLine3();

if (teklaSolid.TryToGeoSolid3(out GeoSolid3 body))
{
    double volume = body.Volume;
    body.TrySubtract(otherBody, out GeoSolid3 remainder);
}

// GeometryHelper back to Tekla
TSG.Point back = point.ToTeklaPoint();
TSG.Matrix matrix = transform.ToTeklaMatrix();

IFC reference models

ReferenceModelObjectConvert and ReferenceModelConvert read the objects of IFC reference models into GeoSolid3 bodies, in the current work plane, like every other coordinate the Tekla API returns (Part.GetSolid() included). The IFC file is read through GeometryHelper.IfcConvert in millimetres at the reference model's Scale, and placed where the reference model was inserted.

using System.Collections.Generic;
using System.Linq;
using GeometryHelper.IfcConvert.Models;
using GeometryHelper.Geometry;
using GeometryHelper.TeklaConvert;
using Tekla.Structures.Model;

// The IFC objects selected in the model view (Tekla.Structures.Model has a ModelObjectSelector too, hence the full name).
var selected = new List<ReferenceModelObject>();
ModelObjectEnumerator selection = new Tekla.Structures.Model.UI.ModelObjectSelector().GetSelectedObjects();
while (selection.MoveNext())
{
    if (selection.Current is ReferenceModelObject referenceObject)
    {
        selected.Add(referenceObject);
    }
}

// The bodies of the selected objects, from any number of reference models and IFC files ...
GeoSolid3[] solids = selected.ToGeoSolids();

// ... or each IFC product whole: GlobalId, name, type, bodies, open surfaces and conversion warnings.
IReadOnlyList<IfcProductGeometry> products = selected.ToIfcGeometries();

// Every physical product of the reference models those objects belong to (each reference model once) ...
GeoSolid3[] everything = selected.Select(o => o.GetReferenceModel()).ToGeoSolids();

// ... or each of them whole.
IReadOnlyList<IfcProductGeometry> everyProduct = selected.Select(o => o.GetReferenceModel()).ToIfcGeometries();

// To see them in the model view: face boundaries red, holes white (see Drawing in the model view).
solids.DrawToTekla();
new Model().CommitChanges();

Worth knowing:

• Nothing is thrown for a bad file. A reference model that is not IFC (DWG, SKP...), a file that cannot be read and an object that cannot be converted are left out; an empty result means nothing could be read. What was left out, and why, is written to GeometryHelperLog (GeometryHelper), along with one line per call saying how many products were converted.
• Options. Without options, a selected assembly returns its parts (IncludeAggregatedParts), as Tekla selects them, and openings are left uncut (ApplyVoids) for speed. Pass new IfcConvertOptions { ApplyVoids = true, IncludeAggregatedParts = true } to cut bolt holes and other openings as Tekla shows them. That is much slower on steel (500 beams took 29 s instead of 1.5 s), and cut bodies can come back not closed. The unit, the scale and the coordinate space always follow the reference model. ReferenceModel.ToGeoSolids() never adds aggregated parts: it visits the parts themselves, which would otherwise be counted twice.
• Speed: choose products by name. Bolts are what makes a whole Tekla model slow to read: every product of a 115 MB steel model took about 17 minutes, 96 % of it on its 5,512 bolts. Leave them out with SkipNames = { "Bolt assembly" } (35 s), or keep only what you need with OnlyNames, for example { "BEAM", "GIRDER", "PRD_COLUMN", "COLUMN" } (3.5 s). The names are those the model gives its parts; both lists ignore case and take * as a wildcard, and apply to an assembly's parts too. See Choosing Products by Name.
• Speed: shared geometry, every core. Tekla's IFC shares one body among the products of one shape (every bolt of a size maps the same one), and each such body is built once and placed for every product using it. The objects of a file xBIM reads into memory are converted on every core at once and come back in the order asked for; a large file xBIM keeps on disk (a 114 MB one, for one) is read one object at a time. 2,549 objects selected from one 6.8 MB ifczip came back in 4.9 s instead of 84 s. ReferenceModel.ToGeoSolids() and ToIfcGeometries() convert every product of such a file on every core at once too, and carry each into the work plane the same way: three reference models of about 21,000 products each, read whole outside Tekla on 24 logical processors, came back in 28 s instead of 85 s, and in 14 s instead of 80 s with the server garbage collector. Each object is converted under the tolerance in force where you call, a Tolerance.Use scope included, and a writer set on GeometryHelperLog is called from those threads, one message at a time.
• Several reference models. Objects are grouped by reference model, so each is placed with its own position, rotation and scale. The same IFC file inserted twice is parsed once and placed twice.
• Assemblies. Selecting an assembly and its parts returns those parts twice.
• The work plane is the one current when you call. It is switched to global for a moment to read where each reference model sits, and restored before any IFC file is read, so do not call from several threads at once.
• Cache. Each IFC file is parsed once per process; a plugin keeps it for the whole Tekla session. A new revision of a reference model usually has a new ActiveFilePath and is parsed afresh. If a file is overwritten in place, call IfcStoreCache.ClearGlobalCache(path), or the old geometry keeps being returned.
• Run time. These methods need .NET Framework 4.8 x64, which every Tekla plugin runs on, and Xbim.Geometry.Engine64.dll, which the build copies next to your plugin: ship it with the extension (.tsep). The rest of this package never loads xBIM.
• A broken IFC file can take Tekla down. The xBIM geometry engine is native code, and an access violation inside it cannot be caught by .NET Framework: it ends the process. Save the model before converting files you do not know.

Drawing in the model view

GeometryDraw draws GeometryHelper geometry as control polycurves, the temporary lines of the model view, to check where a result lies. Like everything the Tekla API is given, they are placed in the current work plane, so what Part.GetSolid() or ToGeoSolids() returned is drawn where it came from.

| DrawToTekla() on a GeoArc3 or a GeoCircle3 | The curve, cut into straight pieces within 0.2 % of its radius |

• Colours (ControlObjectColorEnum) and the line type (ControlObjectLineType, solid when left out) can be passed. A polyline or polygon takes one colour, red when left out. A face or solid takes two, one for outer boundaries and one for holes, red and white when left out: face.DrawToTekla(ControlObjectColorEnum.BLUE, ControlObjectColorEnum.YELLOW, ControlObjectLineType.DashedLine).
• The view shows them after Model.CommitChanges(). The methods do not commit, so drawing a thousand faces costs one commit rather than a thousand.
• Each returns the polycurves it inserted; Delete() on them takes them away again.
• A polyline with fewer than two distinct points, or one Tekla will not insert, is skipped; one Tekla refuses is written to GeometryHelperLog.

Reinforcement

Tekla sets a bar out the way a schedule does: the points it turns at, and a bending radius for each turn. The bar is not that polyline. It is that polyline with a tangent arc at every bend, so it is shorter than its set-out and it does not pass through its own corners. GeoPolylineArc3 holds exactly that.

foreach (GeoPolylineArc3 bar in reinforcement.ToGeoPolylineArc3s())
{
    total += bar.Length;
}

A bar is always read as Tekla works it out, never as it was typed in, because asking Tekla for its geometries means the hooks, the offsets and the lapping are all settled. It reads on any reinforcement at all: a single bar, a group, a curved or circle group, a mesh or a strand. A RebarSet is not a Reinforcement but holds them, so it answers the same call.

A geometry that cannot be read is passed over rather than stopping the rest, and the number passed over is reported through GeometryHelperLog.

Many at once

Reinforcement[] bars = model.GetModelObjectSelector()
    .GetAllObjectsWithType(ModelObject.ModelObjectEnum.REBAR_GROUP)
    .ToArray<Reinforcement>();

List<GeoPolylineArc3[]> byGroup = bars.ToGeoPolylineArc3s();

double[] totalPerGroup = byGroup.Select(g => g.Sum(bar => bar.Length)).ToArray();
GeoPolylineArc3[] everyBar = byGroup.SelectMany(g => g).ToArray();

One entry per reinforcement asked about, in the same order, holding that one's bars. The grouping is kept rather than run together because it cannot be got back: which bar came from which reinforcement is gone the moment they are all in one list, and running them together is a SelectMany away. A null in the sequence gives an empty entry, so the answer always lines up with the question.

Worth using over a loop of single calls rather than only shorter to write: where a Tekla build needs the work plane turned to global first, this turns it once for the whole lot and puts it back once, instead of once per reinforcement.

Tekla Structures 2020

Tekla 2020 hands back the geometry of a lapped bar in the wrong place unless the current work plane is the global one. The 2020 package therefore turns the work plane to global before reading and puts it back afterwards, whether the read finished or threw. The 2025 and 2026 packages do not need it, and there the whole thing compiles away to nothing: the workaround lives in that one year's DLL, through a TeklaVersion2020 compilation symbol the build defines from the year.

The work plane is model-wide state, so the restore matters more than the change; it happens in a finally, by way of IDisposable.

The pieces underneath

Tekla gives one radius per bend, so a bar of four points has two, and the first belongs to the second point because nothing turns at the start of a bar. A list already as long as the points is taken as it is, which is the layout GeometryHelper itself uses. A bend with too little straight run either side to fit its radius is left square rather than forced, and where two bends want more of the run between them than it is long, the one taking more of it gives way.

Everything but the read itself works on plain data holders, so it runs in the tests without Tekla installed. GetRebarGeometries, and the work plane the 2020 package turns, need the modeller.

What is checked rather than trusted

Tekla hands back what its modeller happens to hold; GeometryHelper asks for flatness, a closed boundary, and normals that point out of the body. The conversions do that checking, because a body that only looks right measures wrong later and says nothing about why.

• A coordinate system whose Y axis is not quite square to its X axis is squared up.
• Each face is turned to agree with the normal Tekla gives it, and the finished body is turned inside out if its signed volume says the whole surface arrived reversed. Without that, volume still measures the same but every containment query answers backwards.
• A face out of flat, and a face with a hole off its plane, come as triangles on the corners Tekla gave (FaceConvert.TryReadFaces, built on GeoFace3.FromLoops). The triangles keep every edge the face shares with its neighbours, so a solid Tekla holds closed comes out closed, whatever the tolerance.
• A face with no area is skipped rather than thrown on, which leaves the body no longer closed — so ask IsClosed() before trusting a volume.

Tekla models in millimetres with coordinates that can run to hundreds of thousands, and its own cuts leave faces a little out of flat: the top face of a notched beam came 0.04 mm out at one corner. The default tolerance is a hundredth of a millimetre for points and for flatness; a face further out of flat than that comes as triangles on its own corners rather than a hole, so a Tekla model reads whole without a tolerance of its own; pass a Tolerance only where a model needs something else.

Licence

MIT. The Tekla Structures assemblies this library compiles against are covered by Trimble's own licence terms, not by this one.