Muggle.TsExtensions.CodingHelper 2.0.0

Muggle.TsExtensions.CodingHelper

Table of Contents

• Generator for plugin data class
  • Example
• Generator for plugin class
  • Fields and "GetFieldValuesFrom" method
    • Example
  • "SetDataToDefaultIfUnset" method, "Creat**" methods and "ModifyTo**" methods
    • Example
• Generator for view model class
  • System preset properties
  • Specific properties
    • Example
• Demo

Generator for plugin data class

Apply these attributes to plugin data class to auto generate fields (with StructuresFieldAttribute):

• GeneralFieldsAttribute
• PartFieldsAttribute
• PlateFieldsAttribute
• WeldFieldsAttribute
• BoltFieldsAttribute
• BoltCircleFieldsAttribute
• ChamferFieldsAttribute

Note: Mapping relationship between model object properties and plugin attribute names see here.

Example

The source codes by hand:

// in PluginData.cs

using Muggle.TsExtensions.CodingHelper.Generators;

[GeneralFields(typeof(int), "num")]
[PlateFields("Stiffener")]
public partial class PluginData { }

Then it will auto generate codes behind like this:

//  in PluginData.g.cs

public partial class PluginData {
        
        [global::Tekla.Structures.Plugins.StructuresField("num")]
        public int Num;
        
        [global::Tekla.Structures.Plugins.StructuresField("PLStiffenerNAME")]
        public string PlateStiffenerName;
        
        [global::Tekla.Structures.Plugins.StructuresField("PLStiffenerT")]
        public double PlateStiffenerThickness;
        
        [global::Tekla.Structures.Plugins.StructuresField("PLStiffenerB")]
        public double PlateStiffenerBreadth;
        
        [global::Tekla.Structures.Plugins.StructuresField("PLStiffenerH")]
        public double PlateStiffenerHeight;
        
        [global::Tekla.Structures.Plugins.StructuresField("PLStiffenerMATL")]
        public string PlateStiffenerMaterial;
        
        [global::Tekla.Structures.Plugins.StructuresField("PLStiffenerFNSH")]
        public string PlateStiffenerFinish;
        
        [global::Tekla.Structures.Plugins.StructuresField("PLStiffenerCLS")]
        public int PlateStiffenerClass;
        
        [global::Tekla.Structures.Plugins.StructuresField("PLStiffenerASMP")]
        public string PlateStiffenerAssemblyPrefix;
        
        [global::Tekla.Structures.Plugins.StructuresField("PLStiffenerASMN")]
        public int PlateStiffenerAssemblyStartNumber;
        
        [global::Tekla.Structures.Plugins.StructuresField("PLStiffenerPTP")]
        public string PlateStiffenerPartPrefix;
        
        [global::Tekla.Structures.Plugins.StructuresField("PLStiffenerPTN")]
        public int PlateStiffenerPartStartNumber;
}

Generator for plugin class

Fields and "GetFieldValuesFrom" method

Apply "FieldsFromAttribute" on the plugin class and input the plugin data type, then it will auto generate private fields one-to-one corresponds with each public fields (including manually written fields and generated fields) in data type. And it will also generate a "GetFieldValuesFrom" method, you need to manually call this method at an appropriate location.

Example

The source codes by hand:

// in PluginData.cs

using Muggle.TsExtensions.CodingHelper.Generators;

[PlateFields("Stiffener")]
public partial class PluginData { 

    [StructuresField("UselessAttribute")]
    public int UselessAttribute;
}


// in Plugin.cs

using Muggle.TsExtensions.CodingHelper.Generators;

[Plugin("Plugin")]
[PluginUserInterface("Plugin.View")]
[FieldsFrom(typeof(PluginData))]
public partial class Plugin : PluginBase {

    public Plugin(PluginData data) {
        GetFieldValuesFrom(data);
    }
}

Then it will auto generate codes behind like this:

// in Plugin.g.cs

public partial class Plugin {
    
    private int _uselessAttribute;
    
    private string _plateStiffenerName;
    private double _plateStiffenerThickness;
    private double _plateStiffenerBreadth;
    private double _plateStiffenerHeight;
    private string _plateStiffenerMaterial;
    private string _plateStiffenerFinish;
    private int _plateStiffenerClass;
    private string _plateStiffenerAssemblyPrefix;
    private int _plateStiffenerAssemblyStartNumber;
    private string _plateStiffenerPartPrefix;
    private int _plateStiffenerPartStartNumber;

    private void GetFieldValuesFrom(PluginData data) {
        _uselessAttribute = data.UselessAttribute;

        _plateStiffenerName = data.PlateStiffenerName;
        _plateStiffenerThickness = data.PlateStiffenerThickness;
        _plateStiffenerBreadth = data.PlateStiffenerBreadth;
        _plateStiffenerHeight = data.PlateStiffenerHeight;
        _plateStiffenerMaterial = data.PlateStiffenerMaterial;
        _plateStiffenerFinish = data.PlateStiffenerFinish;
        _plateStiffenerClass = data.PlateStiffenerClass;
        _plateStiffenerAssemblyPrefix = data.PlateStiffenerAssemblyPrefix;
        _plateStiffenerAssemblyStartNumber = data.PlateStiffenerAssemblyStartNumber;
        _plateStiffenerPartPrefix = data.PlateStiffenerPartPrefix;
        _plateStiffenerPartStartNumber = data.PlateStiffenerPartStartNumber;
    }
}

"SetDataToDefaultIfUnset" method, "Creat**" methods and "ModifyTo**" methods

Apply these attributes on the plugin class or its data field or property, then it will auto generate a "SetDataToDefaultIfUnset" method, a series of "Creat**" methods and "ModifyTo**" methods:

• GeneralFieldDefaultValuesAttribute
• PartFieldDefaultValuesAttribute
• PlateFieldDefaultValuesAttribute
• WeldFieldDefaultValuesAttribute
• BoltFieldDefaultValuesAttribute
• BoltCircleFieldDefaultValuesAttribute
• ChamferFieldDefaultValuesAttribute

The "SetDataToDefaultIfUnset" used to set fields of plugin or fields of plugin data member to default value, if they are not set form user interface.

The "Creat**" method only need to pass in generic parameter to automatically use the associated fields to create model object.

The "ModifyTo**" method only need to pass in existing object to automatically use the associated fields to modify it.

Note: When applied on class, you need to apply "FieldsFromAttribute" also.

Note: You need to pay attention to the order of calling the "SetDataToDefaultIfUnset" method and the "GetFieldValuesFrom" method. Otherwise, you might not get the correct values.

Applied "FieldsFromAttribute"	Place "***FieldDefaultValuesAttribute" applied on	Calling order	Way to access value
Yes	Class	GetFieldValuesFrom(data);<br/>SetDataToDefaultIfUnset();	Only fields
Yes	Data member (field or property)	SetDataToDefaultIfUnset();<br/>GetFieldValuesFrom(data);	Both fields and data member
No	Data member (field or property)	SetDataToDefaultIfUnset();<br/>//GetFieldValuesFrom(data);	Only data member

Example

The source codes by hand:

// in Plugin.cs

using Muggle.TsExtensions.CodingHelper.Generators;

[Plugin("Plugin")]
[PluginUserInterface("Plugin.View")]
[FieldsFrom(typeof(PluginData))]
public partial class Plugin : PluginBase {

    [PlateFieldDefaultValues("Stiffener", breadth: 300, Thickness = 14, Material = "Q235")]
    public PluginData Data { get; set; }

    public Plugin(PluginData data) {
        Data = data;
        SetDataToDefaultIfUnset();
        GetFieldValuesFrom(Data);
    }
    
    public override List<InputDefinition> DefineInput() {
        /* ... */
    }
    
    public override bool Run(List<InputDefinition> input) {
        /* ... */
        var stif = CreatPlateStiffener<ContourPlate>();
        stif.Insert();
        
        var plate = new Beam();
        ModifyToPlateStiffener(ref plate);
        /* ... */
    }
}

Then it will auto generate codes behind like this:

// in Plugin.g.cs

public partial class Plugin {

    private void SetDataToDefaultIfUnset() {
        
        if (Data.PlateStiffenerThickness <= 0)
            Data.PlateStiffenerThickness = 14;
        if (Data.PlateStiffenerBreadth <= 0)
            Data.PlateStiffenerBreadth = 300;
        if (Data.PlateStiffenerHeight <= 0)
            Data.PlateStiffenerHeight = 0;
        if (IsDefaultValue(Data.PlateStiffenerMaterial))
            Data.PlateStiffenerMaterial = "Q235";
        if (IsDefaultValue(Data.PlateStiffenerName))
            Data.PlateStiffenerName = "";
        if (IsDefaultValue(Data.PlateStiffenerFinish))
            Data.PlateStiffenerFinish = "";
        if (IsDefaultValue(Data.PlateStiffenerClass))
            Data.PlateStiffenerClass = 99;
        if (IsDefaultValue(Data.PlateStiffenerAssemblyPrefix))
            Data.PlateStiffenerAssemblyPrefix = "A";
        if (IsDefaultValue(Data.PlateStiffenerAssemblyStartNumber))
            Data.PlateStiffenerAssemblyStartNumber = 1;
        if (IsDefaultValue(Data.PlateStiffenerPartPrefix))
            Data.PlateStiffenerPartPrefix = "P";
        if (IsDefaultValue(Data.PlateStiffenerPartStartNumber))
            Data.PlateStiffenerPartStartNumber = 1;
    }
    
    private T CreatPlateStiffener<T>() where T : global::Tekla.Structures.Model.Part, new() {
        if (typeof(T) == typeof(global::Tekla.Structures.Model.Brep))
            throw new global::System.NotSupportedException($"Type \"{typeof(global::Tekla.Structures.Model.Brep)}\" not supported.");
        
        T plate = new T();
        plate.Name = Data.PlateStiffenerName;
        switch (typeof(T).ToString()) { 
        case "Tekla.Structures.Model.Beam": 
        case "Tekla.Structures.Model.PolyBeam": 
        case "Tekla.Structures.Model.SpiralBeam": 
            plate.Profile.ProfileString = $"PL{Data.PlateStiffenerThickness}*{Data.PlateStiffenerBreadth}"; 
            break; 
        case "Tekla.Structures.Model.BentPlate": 
        case "Tekla.Structures.Model.ContourPlate": 
        case "Tekla.Structures.Model.LoftedPlate": 
            plate.Profile.ProfileString = $"PL{Data.PlateStiffenerThickness}"; 
            break;
        }
        plate.Material.MaterialString = Data.PlateStiffenerMaterial;
        plate.Finish = Data.PlateStiffenerFinish;
        plate.Class = Data.PlateStiffenerClass.ToString();
        plate.AssemblyNumber.Prefix = Data.PlateStiffenerAssemblyPrefix;
        plate.AssemblyNumber.StartNumber = Data.PlateStiffenerAssemblyStartNumber;
        plate.PartNumber.Prefix = Data.PlateStiffenerPartPrefix;
        plate.PartNumber.StartNumber = Data.PlateStiffenerPartStartNumber;
        return plate;
    }
    
    private void ModifyToPlateStiffener<T>(ref T plate) where T : global::Tekla.Structures.Model.Part {
        if (typeof(T) == typeof(global::Tekla.Structures.Model.Brep))
            throw new global::System.NotSupportedException($"Type \"{typeof(global::Tekla.Structures.Model.Brep)}\" not supported.");
        
        plate.Name = Data.PlateStiffenerName;
        switch (typeof(T).ToString()) { 
        case "Tekla.Structures.Model.Beam": 
        case "Tekla.Structures.Model.PolyBeam": 
        case "Tekla.Structures.Model.SpiralBeam": 
            plate.Profile.ProfileString = $"PL{Data.PlateStiffenerThickness}*{Data.PlateStiffenerBreadth}"; 
            break; 
        case "Tekla.Structures.Model.BentPlate": 
        case "Tekla.Structures.Model.ContourPlate": 
        case "Tekla.Structures.Model.LoftedPlate": 
            plate.Profile.ProfileString = $"PL{Data.PlateStiffenerThickness}"; 
            break;
        }
        plate.Material.MaterialString = Data.PlateStiffenerMaterial;
        plate.Finish = Data.PlateStiffenerFinish;
        plate.Class = Data.PlateStiffenerClass.ToString();
        plate.AssemblyNumber.Prefix = Data.PlateStiffenerAssemblyPrefix;
        plate.AssemblyNumber.StartNumber = Data.PlateStiffenerAssemblyStartNumber;
        plate.PartNumber.Prefix = Data.PlateStiffenerPartPrefix;
        plate.PartNumber.StartNumber = Data.PlateStiffenerPartStartNumber;
    }
}

Generator for view model class

System preset properties

Inherit view model from preset view model base to make it has ability to notify when its property changed and has some Tekla Structures preset properties.

• NotificationObject

  A simple abstract class which implement INotifyPropertyChanged, inherit from it so you can use OnPropertyChanged method directly.

• ConnectionViewModel

  An abstract class inherit from NotificationObject, and has a several Tekla Structures preset properties for connection type plugin. The usage of properties is consistent with the options in Tekla Structures system connection component general tab.

• DetailViewModel

  An abstract class inherit from NotificationObject, and has a several Tekla Structures preset properties for detail type plugin. The usage of properties is consistent with the options in Tekla Structures system detail component general tab.

• CustomPartViewModel

  An abstract class inherit from NotificationObject, and has a several Tekla Structures preset properties for custom part type plugin. The usage of properties is consistent with the options in Tekla Structures system part component general tab.

Specific properties

Apply these attributes to view model class to auto generate properties (with StructuresDialogAttribute) and set default values at the same time:

• GeneralPropertiesAttribute
• PartPropertiesAttribute
• PlatePropertiesAttribute
• WeldPropertiesAttribute
• BoltPropertiesAttribute
• BoltCirclePropertiesAttribute
• ChamferPropertiesAttribute

Note: Mapping relationship between model object properties and plugin attribute names see here.

Example

The source codes by hand:

// in MainWindowViewModel.cs

using Muggle.TsExtensions.CodingHelper.Generators;
using Tekla.Structures.Datatype;

[GeneralProperties(typeof(Integer), "num", 10)]
[PlatePropertiesWithDefaultValues("Stiffener", 10, breadth: 200.0, Height = 300.00,)]
public partial class MainWindowViewModel : ConnectionViewModel { 
    // ...
}

Then it will auto generate codes behind like this:

// in MainWindowViewModel.g.cs

using System;

public partial class MainWindowViewModel {
    
    private global::Tekla.Structures.Datatype.Integer _num;
    private global::Tekla.Structures.Datatype.Double _plateStiffenerThickness;
    private global::Tekla.Structures.Datatype.Double _plateStiffenerBreadth;
    private global::Tekla.Structures.Datatype.Double _plateStiffenerHeight;
    private global::Tekla.Structures.Datatype.String _plateStiffenerMaterial;
    private global::Tekla.Structures.Datatype.String _plateStiffenerName;
    private global::Tekla.Structures.Datatype.String _plateStiffenerFinish;
    private global::Tekla.Structures.Datatype.Integer _plateStiffenerClass;
    private global::Tekla.Structures.Datatype.String _plateStiffenerAssemblyPrefix;
    private global::Tekla.Structures.Datatype.Integer _plateStiffenerAssemblyStartNumber;
    private global::Tekla.Structures.Datatype.String _plateStiffenerPartPrefix;
    private global::Tekla.Structures.Datatype.Integer _plateStiffenerPartStartNumber;
    
    [global::Tekla.Structures.Dialog.StructuresDialog("num", typeof(global::Tekla.Structures.Datatype.Integer))]
    public global::Tekla.Structures.Datatype.Integer Num {
        get {
            return _num;
        }
        set {
            _num = value == int.MinValue ? 10 : value;
            OnPropertyChanged();
        }
    }
    
    [global::Tekla.Structures.Dialog.StructuresDialog("PLStiffenerT", typeof(global::Tekla.Structures.Datatype.Double))]
    public global::Tekla.Structures.Datatype.Double PlateStiffenerThickness {
        get {
            return _plateStiffenerThickness;
        }
        set {
            _plateStiffenerThickness = value == int.MinValue ? 10 : value;
            OnPropertyChanged();
        }
    }
    
    [global::Tekla.Structures.Dialog.StructuresDialog("PLStiffenerB", typeof(global::Tekla.Structures.Datatype.Double))]
    public global::Tekla.Structures.Datatype.Double PlateStiffenerBreadth {
        get {
            return _plateStiffenerBreadth;
        }
        set {
            _plateStiffenerBreadth = value == int.MinValue ? 0 : value;
            OnPropertyChanged();
        }
    }
    
    [global::Tekla.Structures.Dialog.StructuresDialog("PLStiffenerH", typeof(global::Tekla.Structures.Datatype.Double))]
    public global::Tekla.Structures.Datatype.Double PlateStiffenerHeight {
        get {
            return _plateStiffenerHeight;
        }
        set {
            _plateStiffenerHeight = value == int.MinValue ? 0 : value;
            OnPropertyChanged();
        }
    }
    
    [global::Tekla.Structures.Dialog.StructuresDialog("PLStiffenerMATL", typeof(global::Tekla.Structures.Datatype.String))]
    public global::Tekla.Structures.Datatype.String PlateStiffenerMaterial {
        get {
            return _plateStiffenerMaterial;
        }
        set {
            _plateStiffenerMaterial = string.IsNullOrEmpty(value) ? "" : value;
            OnPropertyChanged();
        }
    }
    
    [global::Tekla.Structures.Dialog.StructuresDialog("PLStiffenerNAME", typeof(global::Tekla.Structures.Datatype.String))]
    public global::Tekla.Structures.Datatype.String PlateStiffenerName {
        get {
            return _plateStiffenerName;
        }
        set {
            _plateStiffenerName = string.IsNullOrEmpty(value) ? "" : value;
            OnPropertyChanged();
        }
    }
    
    [global::Tekla.Structures.Dialog.StructuresDialog("PLStiffenerFNSH", typeof(global::Tekla.Structures.Datatype.String))]
    public global::Tekla.Structures.Datatype.String PlateStiffenerFinish {
        get {
            return _plateStiffenerFinish;
        }
        set {
            _plateStiffenerFinish = string.IsNullOrEmpty(value) ? "" : value;
            OnPropertyChanged();
        }
    }
    
    [global::Tekla.Structures.Dialog.StructuresDialog("PLStiffenerCLS", typeof(global::Tekla.Structures.Datatype.Integer))]
    public global::Tekla.Structures.Datatype.Integer PlateStiffenerClass {
        get {
            return _plateStiffenerClass;
        }
        set {
            _plateStiffenerClass = value == int.MinValue ? 99 : value;
            OnPropertyChanged();
        }
    }
    
    [global::Tekla.Structures.Dialog.StructuresDialog("PLStiffenerASMP", typeof(global::Tekla.Structures.Datatype.String))]
    public global::Tekla.Structures.Datatype.String PlateStiffenerAssemblyPrefix {
        get {
            return _plateStiffenerAssemblyPrefix;
        }
        set {
            _plateStiffenerAssemblyPrefix = string.IsNullOrEmpty(value) ? "A-" : value;
            OnPropertyChanged();
        }
    }
    
    [global::Tekla.Structures.Dialog.StructuresDialog("PLStiffenerASMN", typeof(global::Tekla.Structures.Datatype.Integer))]
    public global::Tekla.Structures.Datatype.Integer PlateStiffenerAssemblyStartNumber {
        get {
            return _plateStiffenerAssemblyStartNumber;
        }
        set {
            _plateStiffenerAssemblyStartNumber = value == int.MinValue ? 1 : value;
            OnPropertyChanged();
        }
    }
    
    [global::Tekla.Structures.Dialog.StructuresDialog("PLStiffenerPTP", typeof(global::Tekla.Structures.Datatype.String))]
    public global::Tekla.Structures.Datatype.String PlateStiffenerPartPrefix {
        get {
            return _plateStiffenerPartPrefix;
        }
        set {
            _plateStiffenerPartPrefix = string.IsNullOrEmpty(value) ? "P" : value;
            OnPropertyChanged();
        }
    }
    
    [global::Tekla.Structures.Dialog.StructuresDialog("PLStiffenerPTN", typeof(global::Tekla.Structures.Datatype.Integer))]
    public global::Tekla.Structures.Datatype.Integer PlateStiffenerPartStartNumber {
        get {
            return _plateStiffenerPartStartNumber;
        }
        set {
            _plateStiffenerPartStartNumber = value == int.MinValue ? 1 : value;
            OnPropertyChanged();
        }
    }
}

Demo

You can get a complete demo project from here.