GeometryHelper.IfcConvert 5.0.0

GeometryHelper.IfcConvert

Converts geometry between IFC models (via xBIM) and GeometryHelper (GeometryHelper): points, vectors, transformation matrices, planar faces, curved surfaces, and 3D solids.

What It Does

GeometryHelper.IfcConvert bridges building information models in IFC (IFC2x3, IFC4, IFC4x3) to pure computational geometry structures in GeometryHelper:

• Converts 3D points (XbimPoint3D), vectors (XbimVector3D), and homogeneous transformation matrices (XbimMatrix3D / GeoTransform3).
• Converts IFC boundary representations and swept solids (IXbimSolid, IIfcGeometricRepresentationItem, IIfcProduct, IIfcMappedItem) into GeoSolid3 bodies.
• Handles planar faces with both outer boundaries and inner cutout loops/holes (InnerBounds).
• Automatically tessellates curved and non-planar faces into planar triangles, maintaining strict coplanarity compliance for GeometryHelper.
• Preserves hierarchical coordinate placements across nested mapped items and product placements.
• Provides thread-safe IFC store caching (IfcStoreCache) with GlobalId indexing.

Installation

dotnet add package GeometryHelper.IfcConvert

The package is self-contained: it bundles all required customized xBIM managed assemblies and the 64-bit native geometry engine (Xbim.Geometry.Engine64.dll).

The library targets netstandard2.0, but it runs only in a .NET Framework 4.8, Windows x64 process: the bundled xBIM geometry engine is C++/CLI built for .NET Framework 4.7.2. A .NET Core / .NET 5+ project can install the package, build against it and open a model, but every geometry conversion fails when the engine loads. Nothing is thrown: the product comes back without solids, and its Warnings read Conversion failed: FileLoadException: Failed to load Xbim.Geometry.Engine64.dll.

System.BadImageFormatException: Could not load file or assembly 'GeometryHelper.IfcConvert' or one of its dependencies.
An attempt was made to load a program with an incorrect format.

<PropertyGroup>
  <PlatformTarget>x64</PlatformTarget>
</PropertyGroup>

How Winding and Orientations are Handled

GeometryHelper measures volumes and point containment assuming outward-pointing face normals. Orientation is propagated across shared edges (neighbouring faces must traverse a shared edge in opposite directions), so bodies with mixed orientations, such as boolean results, are repaired face by face. Each connected shell is then turned outwards by the sign of its volume. Hole loops are stored wound like their boundary, as GeoSolid3 expects.

Planar vs Curved Geometry

A solid whose faces and edges are all planar and straight is read face by face: outer loops and hole loops become GeoPolygon3 rings. A solid with any curved face or curved edge (round columns, tubes, a plate with a bolt hole) is triangulated as a whole by the geometry engine, so shared edges are subdivided once and the mesh is watertight. Reading it face by face would collapse circular loops to their vertices and drop the hole.

IfcConvertOptions.DeflectionTolerance is the chord tolerance in output units. The default (0) uses the deflection xBIM derives from the model's length unit, which keeps round sections within about 0.5 % of their true volume.

Conversion Rules

• Body only: the Body representation is converted (then Body-*, then Facetation). Box, Axis, Clearance and similar representations are ignored so they cannot add extra solids.
• Mapped items: world = MappingTarget × MappingOrigin × local, the order IfcOpenShell uses. (xBIM's own scene builder applies them the other way round, and ISO 10303-43 reads the origin as inverted. All three agree when MappingOrigin is the identity, which covers most exports.)
• Openings (ApplyVoids, off by default for speed): with ApplyVoids = true, openings are cut from the exact B-rep by the geometry engine, in the host's frame, so they are also correct with CoordinateSpace.Local and for round openings. If an opening cannot be cut that way, conversion falls back to the GeoSolid3 boolean. Cutting costs time: on a Tekla steel model, the first conversion of 500 beams (183 of them with bolt holes or cuts) took 1.5 s uncut and 29 s with openings cut. Most of those cut beams also came back not closed (a warning says so): their volumes remain plausible, but point containment may be off.
• Model-wide queries (GetAllSolids, EnumerateSolids, EnumerateGeometries) skip openings, spatial elements, annotations, grids, virtual elements, ports and structural analysis items unless IncludeNonPhysicalProducts is set. Queries by GlobalId or type name are not filtered.
• Assemblies: with IncludeAggregatedParts, a product also returns the parts it aggregates, for example a Tekla IfcElementAssembly, which has no body of its own.
• Units: property and quantity units come from the value when present, otherwise from the project unit for that measure. Tekla, for example, exports lengths in mm but areas in m2 and volumes in m3. Properties attached to the product's type are included, and occurrence values override them.
• Duplicate GlobalIds are listed in IfcStoreCache.DuplicateGlobalIds; only the first product with such an id is reachable by GUID.

Choosing Products by Name

SkipNames leaves out the products whose names match, and OnlyNames keeps only those. A product left out comes back empty, and its name is checked before any geometry is built, so it costs next to nothing. Both lists ignore case and take * as a wildcard. A name matching both is skipped, and a product with no name matches only "*" in OnlyNames.

// Everything but the bolts.
var noBolts = new IfcConvertOptions { SkipNames = { "Bolt assembly" } };

// Only the main members, or only the plates: the names are those the model gives its parts.
var members = new IfcConvertOptions { OnlyNames = { "BEAM", "GIRDER", "PRD_COLUMN", "COLUMN" } };
var plates = new IfcConvertOptions { OnlyNames = { "*PLATE" } };

// AddOnlyNames and AddSkipNames take names one by one or as a list, trim them, ignore blank ones and chain,
// which suits names read from a settings file or a text box.
var fromSettings = new IfcConvertOptions().AddOnlyNames(" BEAM", "GIRDER ", "").AddSkipNames("Bolt assembly");

Reading every product of a 115 MB Tekla steel model (21,188 products) took about 17 minutes, 96 % of it on its 5,512 bolts. Leaving the bolts out took 35 s, only the main members 3.5 s, and only the plates 3.8 s.

Both lists also apply to the parts an assembly aggregates (IncludeAggregatedParts), so with OnlyNames, list the parts wanted as well as the assembly. Neither applies to the openings that cut a product.

Conversion Warnings

A representation item that fails is skipped rather than failing the whole product, and every such problem is recorded in IfcProductGeometry.Warnings (HasWarnings for a quick check). Examples: an item that produced no solid, a shape the engine reports as invalid (skipped, because reading it can fault inside the native engine), faces left out, a solid that is not closed, openings that fell back to the GeoSolid3 boolean. Messages about an item start with its STEP entity label, e.g. #123 IfcExtrudedAreaSolid: It produced no solid., so the item can be found in the IFC file.

foreach (IfcProductGeometry g in model.EnumerateGeometries())
{
    foreach (string warning in g.Warnings)
    {
        Console.WriteLine($"{g.GlobalId} {g.IfcType}: {warning}");
    }
}

Moving Converted Geometry

To place a product somewhere else, for example where a Tekla reference model was inserted, use IfcProductGeometry.TransformBy rather than GeoSolid3.TransformBy on each body:

IfcProductGeometry placed = geometry.TransformBy(transform, options.Tolerance);

The conversion builds faces with a finer area threshold than Tolerance.Global (EqualPoint squared rather than EqualVector), so a triangulated or cut body can carry thin sliver faces that are valid there. GeoSolid3.TransformBy checks every face against Tolerance.Global again and throws on the whole body: on a 115 MB Tekla IFC, 3 of 500 beams read with ApplyVoids = true were lost that way. TransformBy rebuilds the faces with the tolerance of the conversion, so pass the Tolerance of the options the product was read with (the default is Tolerance.Global, as in the options). It returns a copy: bodies, open surfaces and Placement are carried, the GlobalId, name, type, tag and warnings are kept, and the cached geometry is left unchanged. What the transformation itself collapses, such as a body scaled down to nothing, is left out and added to Warnings.

Quick Start

using System;
using System.Collections.Generic;
using System.IO;
using GeometryHelper.IfcConvert.Core;
using GeometryHelper.IfcConvert.Models;
using GeometryHelper.Geometry;

string[] ifcFiles = { @"C:\Models\Building-A.ifc", @"C:\Models\Building-B.ifc" };
var options = new IfcConvertOptions { TargetUnit = LengthUnit.Meters };

foreach (string ifcFile in ifcFiles)
{
    // 1. Get the model from the process-wide cache (pure GeometryHelper, zero xBIM compile-time dependencies).
    //    The first call for a file parses it; later calls with the same path return the same instance at once,
    //    together with every geometry and property it has already converted.
    //    Pass the full path of the file; a relative path throws ArgumentException.
    IfcStoreCache model = IfcStoreCache.GetOrCreate(ifcFile);

    // 2. Query product metadata catalog (super lightweight, zero 3D conversion cost)
    IReadOnlyList<IfcProductMetadata> catalog = model.GetProductCatalog();
    Console.WriteLine($"{Path.GetFileName(ifcFile)}: {catalog.Count} products, unit {model.OriginalLengthUnit}");

    // 3. Loop over every product: complete geometry information (solids, surfaces, AABB, warnings)
    foreach (IfcProductMetadata product in catalog)
    {
        IfcProductGeometry geom = model.GetGeometry(product.GlobalId, options);
        if (geom == null || geom.IsEmpty)
        {
            continue;
        }

        Console.WriteLine($"Name: {geom.Name}, GUID: {geom.GlobalId}, Type: {geom.IfcType}");
        Console.WriteLine($"  Total Volume: {geom.TotalVolume:F4} m3");
        Console.WriteLine($"  Bounding Box: Min={geom.BoundingBox.Min}, Max={geom.BoundingBox.Max}");

        foreach (GeoSolid3 s in geom.Solids)
        {
            Console.WriteLine($"  Solid Faces: {s.Faces.Count}, Volume: {s.Volume:F4} m3");
        }

        foreach (GeoFace3 surface in geom.OpenSurfaces)
        {
            Console.WriteLine($"  Surface Area: {surface.Area:F4} m2");
        }

        foreach (string warning in geom.Warnings)
        {
            Console.WriteLine($"  Warning: {warning}");
        }
    }

    // 4. Retrieve all solids of a specific IFC type (e.g. IfcWall, IfcBeam, IfcColumn)
    var optionsWithVoids = new IfcConvertOptions { TargetUnit = LengthUnit.Meters, ApplyVoids = true };
    IReadOnlyList<GeoSolid3> wallSolids = model.GetSolidsByType("IfcWall", optionsWithVoids);
    Console.WriteLine($"Loaded {wallSolids.Count} wall solids with voids subtracted.");
}

// 5. Cached models stay in memory until released. Release a model when no code uses it any more.
IfcStoreCache.ClearGlobalCache(ifcFiles[0]);                     // one model
IfcStoreCache.ClearGlobalCache();                                 // every cached model

GetOrCreate or Open

Measured on a 115 MB Tekla IFC (25 000 products):

• Use GetOrCreate when the same files are read again during the process's life, for example a plugin command run several times, or several features querying one model. It does not make the first opening faster, so for files each read only once, Open inside using frees memory as soon as possible.
• Dispose does nothing on a cached instance, so wrapping it in using does not release it. Call ClearGlobalCache(path) or ClearGlobalCache() once no code uses the model any more; clearing a model that another caller is still using leaves that caller with a disposed model.
• GetOrCreate and ClearGlobalCache(path) take the full path of the file (C:\Models\A.ifc or \\server\share\A.ifc) and throw ArgumentException for anything relative, including \Models\A.ifc and C:A.ifc: a relative path depends on the current folder, so one file could be cached twice. Different spellings of the same full path (/ or \, . and .. segments, letter case) share one cached model.
• The cache does not watch the file. After the file changes on disk, call ClearGlobalCache(path) to reload it.
• Opening happens under the cache lock, so threads opening different files wait for each other.
• IfcStoreCache.GetGlobalCacheInfo() lists the cached paths and their product counts.

Using with Tekla Structures

GeometryHelper.TeklaConvert reads the objects of IFC reference models through this package: it finds the IFC file of each reference model, reads it in millimetres at the reference model's scale, and places the result where Tekla shows it, in the current work plane. Install the GeometryHelper.TeklaConvert.{year} package of your Tekla version, which brings this one, and see its IFC reference models section for the details.

The example draws every face of the selected reference objects as control polycurves, outer boundaries in red and holes in white:

using System.Collections.Generic;
using GeometryHelper.Geometry;
using GeometryHelper.TeklaConvert;
using Tekla.Structures.Model;
using Tekla.Structures.Model.Operations;

public static class IfcReferenceSample
{
    public static void DrawSelectedReferenceObjects()
    {
        Model model = new Model();

        // The IFC objects selected in the model view (Tekla.Structures.Model has a ModelObjectSelector too, hence the full name).
        var selected = new List<ReferenceModelObject>();
        ModelObjectEnumerator selection = new Tekla.Structures.Model.UI.ModelObjectSelector().GetSelectedObjects();
        while (selection.MoveNext())
        {
            if (selection.Current is ReferenceModelObject referenceObject)
            {
                selected.Add(referenceObject);
            }
        }

        // In the current work plane, which is where control polycurves are drawn too: no work plane to switch.
        GeoSolid3[] solids = selected.ToGeoSolids();

        // Every face as control polycurves (GeometryDraw): outer boundaries red, holes white.
        ControlPolycurve[] drawn = solids.DrawToTekla();

        model.CommitChanges();
        Operation.DisplayPrompt($"{solids.Length} solid(s), {drawn.Length} polycurve(s), from {selected.Count} reference object(s).");
    }
}

Notes:

• GUIDs: the EXTERNAL.GUID report property of a reference object is its IFC GlobalId, the key of every IfcStoreCache query. ReferenceModelObject.GetIfcGuid() reads it, and ReferenceModel.GetReferenceModelObjectByExternalGuid(guid) goes the other way.
• Cache lifetime: a plugin or extension runs inside the Tekla process, so each IFC file is parsed once and every later run is served from the cache. A standalone .exe is a new process each time, so it parses the files on every run.
• Curved parts are triangulated, so a round tube draws hundreds of polycurves. Fine for a visual check; for anything else, work with the GeoSolid3 itself.

Matrix Transformations

xBIM uses row-vector convention ($v \cdot M$) with translations located in the fourth row (OffsetX, OffsetY, OffsetZ). GeoTransform3 uses column-vector convention ($M \cdot v$) with translations located in the fourth column. MatrixConvert.ToGeoTransform3 and MatrixConvert.ToXbimMatrix3D transpose the linear 3x3 block and swap offset rows/columns accordingly, ensuring mathematically identical coordinate transformations between the two systems.